It is an excellent addition to install a bifold shower screen in bathrooms in Singapore. It saves space, looks modern, and provides an effective barrier to prevent water from splashing out.
The installation may seem like a challenging task, but with the right steps, it can be done efficiently. This article explains a simple guide to install a bifold shower screen in your home.
How to Install a Bifold Shower Screen in Singapore?
Installing a bifold shower screen is not as daunting as it may seem to be. With the right tools and guidance, you can easily install a bifold shower screen in Singapore. Therefore, well-known shower screen professionals LS Shower Screen Singapore explains the step-by-step bifold shower screen installation in Singapore.
Moreover, they also offer installation, repair, and replacement of all kinds of shower screens including black frame shower screens, HDB shower screens, and glass shower screens.
1. Prepare Your Tools and Materials
Before you begin to install a bifold shower screen, gather all the necessary tools and materials. You will need a drill, screws, wall plugs, a spirit level, measuring tape, a screwdriver, and silicone sealant. Check that your bifold shower screen has all the required hardware. If you keep everything ready, it will ease the process in the later stages.
2. Measure and Mark the Area
To fit a bifold shower screen, you first need to measure the area where it will be installed. Use a measuring tape to mark the exact position of the frame. Ensure the marks are level and straight. Accurate measurements are essential for the screen to fit properly and function effectively.
3. Attach the Wall Profiles
The wall profiles are the vertical sections that hold the screen in place. Therefore, it is important to align the profiles with your markings on the wall. Drill holes through the profiles into the wall, then insert wall plugs into the holes. Moreover, place the profiles in place with screws. Check that the profiles are straight and firmly attached before moving to the next step.
4. Position the Shower Screen
Once the wall profiles are fixed, position the bifold shower screen inside the profiles. Ensure that the screen aligns perfectly with the frame. Adjust the screen carefully to ensure it opens and closes smoothly. This step requires some patience because proper alignment is critical for the screen to function correctly.
5. Install a Bifold Shower Screen
After positioning the screen, secure it to the wall profiles using the screws provided. Tighten the screws carefully without overdoing it, as this could damage the frame. Check the movement of the bifold screen to ensure it operates smoothly after placing it.
6. Apply Silicone Sealant
To prevent water leakage, apply a thin, even layer of silicone sealant along the edges where the shower screen meets the wall and floor. Use a caulking gun to apply the sealant, and smooth it out with your finger or a sealant tool. Let the silicone cure for at least 24 hours before using the shower.
7. Test the Installation
Once everything is installed and the silicone has dried, test the bifold shower screen. Open and close the screen several times to check for smooth operation. Run water to ensure there are no leaks around the edges. If you notice any issues, make the necessary adjustments.
Conclusion
It is a practical way to install a bifold shower screen and enhance the bathroom’s functionality and aesthetics. By following this step-by-step guide, you can complete the installation process with ease. Proper preparation and attention to detail are key to a successful installation.
