How to Repair a Shower Screen in Singapore

Repair a shower screen with the help of this simple yet effective guide. A functioning shower screen is essential for the aesthetic and functionality of a bathroom. But with longer periods of use, the shower screen can get issues like worn-out seals, loose hinges, and even cracked glass can appear. Fixing these problems is important to maintain the functionality of the shower screen. 

Today, we will discuss some of the most common issues you can face with your shower screens. We will also discuss the solutions to these problems. So stick around to the end to find out your problem and the precise method to deal with it. 

How to Repair a Shower Screen

Repairing a shower screen is a very easy task. With the right tools and patience, your shower screen can be working quickly. Here are some of the most common issues you can find with your shower screen and how to fix them.  Also, LS Shower Screen Singapore provides services for all shower screens, such as L-shaped shower screensblack frame shower screensHDB shower screensframeless shower screens, etc.

1. Hinge Issues

A common problem that requires you to repair a shower screen is broken or old hinges. Old and broken hinges can interfere with the screen’s normal folding mechanism. This interference can lead to the screen getting stuck in the track. 

To fix broken or loose hinges, inspect the hinges first and ensure that there aren’t any signs of wear and tear. If the hinges are new, inspect the area for any dirt or debris and remove it. If the hinges are old, remove them and install new ones. 

Repairing a shower screen

2. Misalignment

Over long periods of use, screens can get misaligned and can’t be properly used. First, inspect the hinges and screws to see any signs of wear and tear. The issue might be with the hinge position if the hinges are spotless. Adjust the hinge with the help of screws and check the alignment again.

Use the levels to check the screen alignment. Ensure the screen sits perfectly within the door frame. If you find any imperfections in the alignment, you can use shims to make a perfect alignment. 

3. Worn Out Sealant And Water Leakage

Water can leak from between the shower screen panels, the screen, and the floor or walls. This usually shows an improper and loose installation in which a slight gap is left between the screen and its attachments. Water leaks can make the whole bathroom wet and slippery, leading to slipping accidents.

First, locate the area of leakage to fix water leakage from the shower screen. Look under the screen and see if you find any gap between the floor and the screen itself. If you find a gap, apply silicone sealant at the edge of the screen.

Let the sealant sit for a while before running the shower again. You can also use plastic or rubber water barrier strips for this purpose. Replace any worn-out sealant by following the above-mentioned steps. 

4. Cracked Panels

A common issue that requires you to fix a shower screen is cracked glass panels. Glass panels can get broken or smashed during the installation process due to a low level of care. Improper handling of the panels and impact damage can also result in cracks.

You can use tempered and reinforced glass that is resistant to minor impacts. Handle the panels with care during the installation process to avoid damage. Don’t over-tighten the screws or any clamps to prevent damaging the panels accidentally. You will have to replace shattered or cracked glass panels to avoid injuries.

how to Repair a shower screen

5. Stuck Screen

Shower screens can get stuck due to misalignment or improperly installed hinges or screws. Stuck screens are difficult to open and close and can get stuck with the user inside the shower. You can check the screen rollers or attached hinges to see if they are properly installed and intact.

In the case of rollers, lubricate the track and the rollers regularly. Remove any dirt or debris from the track or the hinges, and check the mobility again. If the screen has alignment issues, remove it, properly align it, and check the mobility again.

Conclusion

We have discussed some of the most common ways to repair a shower screen in Singapore. We have also discussed the ways to fix these issues. Professional plumbing companies’ help is recommended since they are aware of these issues and take extra care during the installation process.

You can get peace of mind for a small fee as professionals will take care of all the small details. Professionally installed screens can, thus, last a long while and can function effectively without any hiccups. But even if you run into some minor hiccups, you can easily fix them with the help of this guide.