How to Fix a Leaky Shower Screen in Singapore
A leaky shower screen is a continuous headache that can result in several issues. If you’re going through this issue, don’t worry. The remedy is as simple as anything. You can adopt a DIY approach to do this task on your own. However, you will need proper guidance or a set of instructions to fix a leaky shower screen. Therefore, this article aims to provide a step-by-step process to fix the leaky shower screens. Fixing a leaky shower screen is a task that you can handle yourself with a bit of guidance.
How to Fix a Leaky Shower Screen in Singapore?
Nothing is more frustrating for a homeowner than a shower screen leaking the water. This issue needs a prompt action plan to avoid further problems. Fortunately, leaking shower screens in Singapore are not one of the unresolvable issues.
Therefore, LS Shower Screen Singapore provides a comprehensive step-by-step process for DIY enthusiasts and professionals to complete the job successfully. LS Shower Screen Singapore provides services for all shower screens, such as L-shaped shower screens, glass shower screens, HDB shower screens, frameless shower screens, etc.
Tools and Materials Needed
Before you start, keep the following tools and materials at hand.
- Screwdriver
- Caulk gun
- Waterproof silicone sealant
- Utility knife or scraper
- Measuring tape
- Replacement seals or gaskets
- Cleaning supplies
Step 1: Identify the Source of the Leak
Check the overall shower screen area, and run your hand along these areas while in the shower where there is a potential water leak.
Step 2: Clean the Area
Once you’ve located the source of the leak, clean the affected area thoroughly with a detergent and sponge. Then, dry the area thoroughly with a cloth. Cleaning ensures the new sealant or replacement parts stick to the surface properly.
Step 3: Remove Old Sealant or Damaged Parts
If the leak is due to gaps in the sealant, take a utility knife or scraper to remove the old sealant from the edges of the shower screen. Be patient to avoid damaging the house fixtures. If the seals or gaskets are damaged, remove them from the assembly. Take the measurement and ensure the new seals are the same size.
Step 4: Apply New Sealant
When you remove the old sealant and clean the area, apply new waterproof silicone sealant. Put it into the caulk gun and use a steady approach to cover the area where the leaks were identified. Smooth the sealant with a wet finger or a caulking tool to ensure even coverage. Give the sealant proper time to cure.
Step 5: Replace Seals or Gaskets
If the culprits are seals or gaskets, replace them with new ones. Ensure you have a perfect replica of the old sealant. Validate that everything is perfect before proceeding to the next step.
Step 6: Tighten Loose Screws or Panels
Loose screws and misaligned panels are also among the causes of leaks. Use a screwdriver to tighten the screws on the shower screen frame. Check that all panels are perfectly aligned and adjust if required. Tight panels and screws remove the gaps and make a watertight seal.
Step 7: Test for Leaks
When you are confident about the process and have checked everything, Run the shower and check all previously leaky areas. Inspect for any leaks around the shower screen. If you find minor issues, replace them and move to the next step.
Step 8: Regular Maintenance
Regular maintenance is the key to anything working well. Periodically inspect the condition around the shower area, especially the seals and gaskets, and resolve any issues promptly if you notice them.
Conclusion
Fixing a leaky shower screen is a manageable task that can save costly repairs. Locate the leak, clean the area, and apply the suitable rectification method to remove the leaks. Regular maintenance can keep the shower screens in good shape. Read the instructions, adopt a DIY approach, and enjoy the results.
