How to Install a Fixed Shower Screen for Home in Singapore

Install a fixed shower screen to enhance the functionality and aesthetic of your bathroom. A fixed shower screen provides a modern and sleek look and helps keep the bathroom clean by containing water within the shower area.

Whether you have a modern or a traditional bathroom, you can’t ignore the importance of fixed shower screens. Thus, knowing your way around the installation process can greatly help maintain a modern look and feel in your bathroom. 

Today, we will discuss the complete process for installing a fixed shower screen. Gather your tools and let’s get to the installation process. Also, LS Shower Screen Singapore provides services for all shower screens, such as L-shaped shower screensblack frame shower screensHDB shower screensframeless shower screens, etc.

Materials Needed For Fixed Shower Screen Installation

Here are some important materials you will need to install a fixed shower screen in your bathroom. 

  • Fixed shower screen (glass or acrylic)
  • Screws and anchors
  • Screwdrivers
  • Electric drill with masonry tiles
  • Glass clamps
  • Silicone sealant 
  • Measuring tape
  • Caulking gun
  • Level
  • Safety gear (glasses, goggles, etc.)

How to Install a Fixed Shower Screen

Here is the step-by-step guide to install a fixed shower screen.

1. Measurements

First, you must measure the height and width of the area where the fixed glass shower screen will be installed. Accurate measurements are essential in this regard, as they will determine the size of the glass panels for the screen. Remove various bathroom fixtures, like tubs or shower bases, to prevent their interference in installation. 

Once you have measured the area, mark the exact area on the wall where the shower screen will be installed. Ensure that the area has enough space to fit the shower screen.

How to Install a fixed shower screen

2. Position The Wall Channel

Most shower screens have a metal channel that holds the screen in place. Hold the channel up against the wall and ensure it is perfectly vertical. Once you are satisfied with the alignment, mark the position of the screw holes on the wall with a pencil. 

3. Drill Holes For Wall Anchors And Secure The Channel

To install a fixed shower screen, you must drill holes into the bathroom wall to secure the wall anchors. These wall anchors will support the wall channels that will support the fixed shower screen. 

Once the wall anchors have been installed, you can fix the wall channel in place by driving the screws through the channel holes and into the anchors. 

4. Insert The Shower Screen And Secure It

Once the channel is secure, you can lift the shower screen and mount it. If the screen is heavy, you will need a second person’s help. Ensure that the screen fits properly in the shower area. If the screen has additional brackets or fittings, install them to secure the shower screen properly. 

5. Seal The Edges

Apply silicone sealant to the glass edges where it meets the floor, ceiling, or walls. Create a good seal to prevent water leakage outside the area. Sealing also secures the glass in its place and prevents any dislodgement issues.

You can use a caulking gun to ensure a neat, consistent seal. Use your fingers at the end to smoothen the sealant and give it a clean finish.

fixed shower screen installation

6. Final Checks

Usually, the silicone sealant takes 24-48 hours to cure. Once the adhesive has been cured, check the security of the corner screen by applying small amounts of force a few times. Ensure the movements are smooth and the glass is properly aligned. Clean any smudges or fingerprints off the glass with a glass cleaner. 

Conclusion 

We have discussed the complete process to install a fixed shower screen in detail. The whole process is pretty straightforward, and you can get the job done quickly with the right tools. Just remember to wear safety equipment and take all the necessary precautions to prevent any harm to yourself.

You can also get professional help for fixed shower screen installation in Singapore. For a small price, these professionals will visit your house and install the screen cleanly and professionally. 

Frequently Asked Questions

A fixed shower screen fits into wall channels specific to such screens. Install these wall channels first and secure them into wall anchors. You can then install the screen into these channels and secure it in place with the help of screws and brackets.
The installation process is pretty straightforward, and you can get the job done quickly with the right tools. Just remember to wear safety equipment and take all the necessary precautions to prevent any harm to yourself. For fixed shower screen Singapore installation, you can also take the help of professional fixed shower screen installation companies.
Special adhesives are available in the market, and it only takes a few hours to harden and properly secure the screens. However, these adhesives are no match to the permanent solution provided by screws and bolts. Thus, we would advise drilling the wall to secure the shower screen in place for a long time without any instability.